Sai Paradise Machine Tools (india) Private Limited
Jeedimetla, Hyderabad, Telangana
GST No. 36ABBCS9956N1ZG
Call 08048764094 75% Response Rate
Cut & Stripping Series
Prominent & Leading Manufacturer from Hyderabad, we offer standard cable cutting and stripping machine(cutstrip-999), cutting & stripping machine - (cutstrip-999 (4 wire), cutting and stripping machine - multi strip-999 plus, cutting and stripping machine - eco strip - 999, cutting, stripping & twisting machine - (cutstrip-999 plus ) and cutting & stripping machine (uni-strip 999).
Standard Cable Cutting and Stripping Machine(Cutstrip-999)
Price on Request
| Wire Length | 10.0 mm to 1,00,000.0 mm (0.39 to 3937 inches) |
| Stripping Length Increments | 0.1 mm (0.003 inch) |
| Stripping Length Left Side | 30 mm (1.18 inch) |
| Stripping Length Right Side | 30 mm (1.18 inch) |
| Wire Size Range | 0.2 - 3.0 mm2 (12 AWG) |
| Maximum Cable Outer Dia | 4.0 mm (0.15 inch) |
The powerful Cut-Strip-999 processes round cables upto 4 mm outer dia. And it strips both sides upto 30 mm. It has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 100 wires with all the processing parameters. This Cut-Strip-999 is designed in micro-processed based with hybrid stepper motors and HMI
Features:- Quick change guide tubes and blades
- Simple operation with keypad
- User-friendly operation
- Quick programming
- Mid-strip facility available (optional)
- Stripping lengths – Partial strip
- Stripping lengths - Full strip
- Can strip single core as well as small multi-core cables
- Mid-strip facility for small cables (optional)
- Inch mode option to set the blades as per cables
- Step run option to trace the problem if machine malfunctions
- Less Wastage
- Low Noise
- Counter Option
- No wire signal with machine stop option
- Auto start delay facility to run in continuous production
| Cycle Time: | Approx 1 sec |
| Power Supply: | 230 to 240V (50/60 Hz) (optional 110V) |
| Dimensions (L x W x H): | 425 x 320 x 325 mm (16.7 x 12.5 x12.7 inches) |
| Net Weight: | 30 kgs |
| Running Options: | Step mode, Test, Single and Run mode |
| Feed Rate: | 10 to 100 % (500 mm to 1000 mm) (19.6 x 39.37 inches) |
| Blades: | HSS / Carbide |
| Noise Level: | Less than < 70 db |
Productivity Chart of CUT-STRIP-999
| WIRE SIZE | DESCRIPTIONS | QTY / HOUR |
| 0.5 to 1.0 Sq mm (2 wires) | Only Cutting | 12000 |
| One Side Stripping | 7000 | |
| Both Side Stripping | 5000 | |
| 1.5 to 3.0 Sq mm (1 wire) | Only Cutting | 6000 |
| One Side Stripping | 4500 | |
| Both Side Stripping | 3000 |
Note: Standard Length 100 mm unless specified. Quantity might differ as per wire quality.
View Complete details
get quoterequest a call back
Cutting & Stripping Machine - (CutStrip-999 (4 wire)
Price on Request
| Frequency | +-0.1mm ( L x 0.02%) Depends on the materials |
| Voltage | 230 to 240V (50/60 Hz) |
| Compressed Air Connection | 4.0-6.0 bar Dried and filtered air |
| Increment For Strip Length | 30.0 mm |
| Max Outer Diameter | 3.0 sq mm |
| Min Insertion Depth | 20.0 mm |
FEATURES:
• Quick change guide tubes and blades.
• Simple operation of HMI (Touch Screen).
• User-friendly operation.
• Quick programming.
DETAILS:
| Operating interphase | HMI (Touch Screen) |
| Wire Type | PVC,Silicon wires. |
| Minimum cable size | 0.20 sqmm |
| Maximum cable size | 3.0 sq mm |
| Lead Stripping Length | 15.0 mm |
| Tail Stripping Length | 25.0 mm |
| Length Accuracy: | ±0.2 mm ( L x 0.04%) Depends on the materials |
| Noise Level: | < 50 db |
| Air supply | 2.0 bar max |
| Program memory capacity: | Upto 99 no's with all processing parameters |
| Power Supply: | 230 to 240V (50/60 Hz) |
| Motor | 600 Watts |
| Dimensions (L x W x H): | 420 x 340 x 280 mm |
| Net Weight: | 30 kgs |
View Complete details
get quoterequest a call back
Cutting and Stripping Machine - Multi Strip-999 Plus
Price on Request
| Capacity | Upto 200 no's with all processing parameters |
| Stripping Material | flat cable and multi core round cable. |
| Frequency | (50/60 Hz) |
| Voltage | 230 to 240V |
| Max Outer Diameter | 8.0 mm (round),4.0 x 8.0 mm (flat) |
| Short Wire Lengths | 0.50 - 8.0 sqmm |
| Wire Length Range | 360 pcs /h at 500 mm Length and both side 100 mm outer strip length and single line feed (depending |
FEATURES:
Quick change quid tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).
View Complete details
get quoterequest a call back
Cutting and Stripping Machine - Eco Strip - 999
Price on Request
| Frequency | +-0.1MM ( L x 0.02%) Depends on the materials |
| Voltage | 230 to 240V (50/60 Hz) |
| Compressed Air Connection | 4.0-6.0 bar Dried and filtered air |
| Max Outer Diameter | 4.0 - 18.0 mm |
| Short Wire Lengths | 4.0 sqmm |
| Wire Length Range | 50 mm |
FEATURES:
• Quick change guide tubes and blades.
• Simple operation of HMI (Touch Screen).
• User-friendly operation.
• Quick programming.
TECHNICAL DETAILS:
| Operating interphase | HMI (Touch Screen) |
| Wire Type | Pvc,PE,Silicon and other plastic wires and multi core cables. |
| Minimum cable size | 4.0 sqmm |
| Maximum cable size | 50.0 mm |
| Cable Outer Dia | 4.0 – 18.0 mm |
| Lead Stripping Length | 80 mm |
| Tail Stripping Length | 50 mm |
| Length Accuracy: | ±0.1MM ( L x 0.02%) Depends on the materials |
| Noise Level: | < 70 db |
| Program memory capacity: | Upto 99 no’s with all processing parameters |
| Power Supply: | 230 to 240V (50/60 Hz) |
| Motor | 1.6 Kw |
| Air supply | 4.0-6.0 bar Dried and filtered air |
| Dimensions (L x W x H): | 550 x 520 x 370 mm |
| Net Weight: | 85 kgs |
View Complete details
get quoterequest a call back
Cutting, Stripping & Twisting Machine - (CutStrip-999 Plus )
Price on Request
| Cutting Accuracy | +-0.1mm ( L x 0.02%) Depends on the materials |
| Compressed Air Supply | 4.0-6.0 bar Dried and filtered air |
| Motor Power | 800 Watts |
| Power Consumption | 230 to 240V (50/60 Hz) |
| Voltage | 230 to 240V (50/60 Hz) |
| Weight | 35 kgs |
| Diameter Of Wire | 3.0 sq mm |
The CutStripTwist – (Cut Strip – 999+) machines are computerized control, bottom operation, stable working performance, easy operation. It has design capabilities for maximum speed and flexibility, high precision & quick changeover and long term durability. Various applications are easily processed as per the clients requirements.
It has dynamic servo controlled motors driver & PLC based controller and is optimized with touch screen cut, strip and twist-(Cut Strip -999+) helps, save and restore the programs upto 500 types for quick product selection to avoid the delay programme.
FEATURES:
- Two wires can be processed at the same time, automatically Cutting, Stripping & Twisting.
- High productivity.
- Less changeover time.
- Short & easy setup time.
- Very less and negligible maintenance.
| Operating interphase | HMI (Touch Screen) |
| Minimum cable size | 0.20 sqmm |
| Maximum cable size | 3.0 sq mm |
| cable size (Twisting) | 0.2- 1.5 sqmm |
| Lead Stripping Length | 20.0 mm |
| Tail Stripping Length | 30.0 mm |
| Length Accuracy: | ±0.1mm ( L x 0.02%) Depends on the materials |
| Noise Level: | < 50 db |
| Air supply | 4.0-6.0 bar Dried and filtered air |
| Power Supply: | 230 to 240V (50/60 Hz) |
| Motor | 800 Watts |
| Dimensions (L x W x H): | 420 x 340 x 280 mm |
| Net Weight: | 35 kgs |
View Complete details
get quoterequest a call back
Cutting & Stripping Machine (Uni-Strip 999)
Price on Request
| Wire Size Range | 0.3 - 8.0 mm2 |
| Maximum Cable Outer Dia | 8.0 mm (0.31 inch) |
| Wire Length | 70.0 mm to 1,00,000.0 mm (2.7 to 3937 inches) |
| Stripping Length Increments | Full Strip 0.1 mm (0.003 inch) |
| Stripping Length Left Side | 30 mm / 45 mm (1.18 inch / 1.77) for multi-core |
| Stripping Length Right Side | 30 mm / 300 mm (1.18 inch / 11.8) for multi-core |
The powerful Unistrip-999 processes round cables upto 8 mm outer dia. And processes 2 core, 3 core flat and round cables with pull-off lengths upto 100 mm on the right end (leading end) and 40 mm on the left end (trailing end). This Unistrip-999 has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 200 wires with all the processing parameters. This Unistrip-999 is designed in PLC based with servo motors and HMI
Features:- Quick change guide tubes and blades
- Simple operation of HMI (TFT Touch Screen)
- User-friendly operation
- Quick programming
- Mid-strip facility available (optional)
- Stripping lengths – Partial strip
- Stripping lengths - Full strip
- Can strip single core as well as multi-core cables
- Mid-strip facility for small cables
- Inch mode option to set the blades as per cables
- Step run option to trace the problem if machine malfunctions
- Less Wastage
- Low Noise
- Counter Option
- Foot Pedal operation for operator convenience
- No wire signal with machine stop option
- Auto start delay facility to run in continuous production
| Cycle Time: | Approx 1 sec |
| Power Supply: | 230 to 240V (50/60 Hz) (optional 110V) |
| Power requirement: | 1.2 KW |
| Dimensions (L x W x H): | 550 x 400 x 430 mm (21.6 x 15.7 x16.9 inches) |
| Net Weight: | 45 kgs |
| Running Options: | Step mode, Test, Single and Run mode |
| Feed Rate: | 10 to 100 % (500 mm to 1500 mm) (19.6 to 59.0 inches) |
| Blades: | HSS / Carbide |
PRODUCTIVITY CHART OF UNISTRIP-999
| WIRE SIZE | DESCRIPTIONS | QTY / HOUR |
| 0.5 to 1.0 sq mm (3 wires) | Both Side Stripping | 10000 |
| 1.5 to 2.5 sq mm (2 wires) | Both Side Stripping | 6000 |
| 4.0 to 8.0 sq mm (1 wire) | Both Side Stripping | 3000 |
| 2 core and 3 core cutting & stripping | Both Side Stripping | 1000 (At 2 meters length) |
View Complete details
get quoterequest a call back
Fully Automatic Cutting & Stripping Machine (Uni-Strip 999plus)
Price on Request
| Wire Size Range | 0.5 - 16.0 mm2 |
| Maximum Cable Outer Dia | 10.0 mm (0.39 inch) |
| Wire Length | 70.0 mm to 1,00,000.0 mm (2.7 to 3937 inches) |
| Stripping Length Increments | Full Strip 0.1 mm (0.003 inch) |
| Stripping Length Left Side | 30 mm / 45 mm (1.18 inch / 1.77) for multi-core |
| Stripping Length Right Side | 30 mm / 300 mm (1.18 inch / 11.8) for multi-core |
The powerful Unistrip-999+ processes round cables upto 8 mm outer dia. And processes 2 core flat cables with pull-off lengths upto 100 mm on the right end (leading end) and 40 mm on the left end (trailing end). This Unistrip-999+ has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 200 wires with all the processing parameters. This Unistrip-999+ is designed in PLC based with servo motors and HMI
Features:- Quick change guide tubes and blades
- Simple operation of HMI (TFT Touch Screen)
- User-friendly operation
- Quick programming
- Mid-strip facility available (optional)
- Stripping lengths – Partial strip
- Stripping lengths - Full strip
- Can strip single core as well as multi-core cables
- Mid-strip facility for small cables
- Inch mode option to set the blades as per cables
- Step run option to trace the problem if machine malfunctions
- Less Wastage
- Low Noise
- Counter Option
- Foot Pedal operation for operator convenience
- No wire signal with machine stop option
- Auto start delay facility to run in continuous production
| Cycle Time: | Approx 1 sec |
| Power Supply: | 230 to 240V (50/60 Hz) (optional 110V) |
| Power requirement: | 1.2 KW |
| Dimensions (L x W x H): | 550 x 400 x 430 mm (21.6 x 15.7 x16.9 inches) |
| Net Weight: | 45 kgs to 50kgs |
| Running Options: | Step mode, Test, Single and Run mode |
| Feed Rate: | 10 to 100 % (500 mm to 1500 mm) (19.6 to 59.0 inches) |
| Blades: | HSS / Carbide |
PRODUCTIVITY CHART OF UNISTRIP-999+
| WIRE SIZE | DESCRIPTIONS | QTY / HOUR |
| 0.5 to 1.0 sq mm (3 wires) | Both Side Stripping | 10000 |
| 1.5 to 2.5 sq mm (2 wires) | Both Side Stripping | 6000 |
| 4.0 to 8.0 sq mm (1 wire) | Both Side Stripping | 3000 |
| 2 core and 3 core cutting & stripping | Both Side Stripping | 1000 (At 2 meters length) |
Note: Standard Length 100 mm unless specified. Quantity might differ as per wire quality.
View Complete details
get quoterequest a call back
Cutting and Stripping Machine - (SmartStrip-999)
Price on Request
| Automation Grade | Automatic |
| Stripping Material | Twin parallel and flat cable and multi core. |
| Voltage | 230 to 240V (50/60 Hz) |
| Compressed Air Connection | 4.0-6.0 bar Dried and filtered air |
| Max Outer Diameter | 8.0 mm (round), 4.0 x 8.0 mm (flat) |
| Short Wire Lengths | 1.0 - 50.0 mm |
| Wire Length Range | 1.0 - 100.0 mm |
FEATURES:
Quick change quid tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).
DETAILS:
| Operating interphase | PLC With HMI (Touch Screen). |
| Wire Type | Twin parallel and flat cable and multi core. |
| Cable size | 0.50 - 8.0 sqmm |
| Maximum cable Outer dia | 8.0 mm (round), 4.0 x 8.0 mm (flat) |
| Lead Stripping Length | 1.0 - 50.0 mm |
| Tail Stripping Length | 1.0 - 100.0 mm |
| Length Accuracy: | ±0.1mm ( L x 0.02%) Depends on the materials |
| Noise Level: | < 70 db |
| Program memory capacity: | Upto 99 no's with all processing parameters |
| Power Supply: | 230 to 240V (50/60 Hz) |
| Motor | 900 Watts |
| Air supply | 4.0-6.0 bar Dried and filtered air |
| Dimensions (L x W x H): | 420 x 340 x 280 mm |
| Net Weight: | 31 kgs |
View Complete details
get quoterequest a call back
Cutting and Stripping Machine - Multi Strip-999
Price on Request
| Cutting Accuracy | +-0.1mm ( L x 0.02%) Depends on the materials |
| Stripping Material | Twin parallel and flat cable and multi core. |
| Compressed Air Supply | 4.0-6.0 bar Dried and filtered air |
| Motor Power | 900 Watts |
| Power Consumption | 230 to 240V (50/60 Hz) |
| Weight | 31 kgs |
| Wire Cutting Length | 0.50 - 8.0 sqmm |
| Short Wire Lengths | 1.0 - 50.0 mm |
| Wire Length Range | 1.0 - 100.0 mm |
FEATURES:
Quick change quid tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).
TECHNICAL DETAILS:
| Operating interphase | HMI (Touch Screen) |
| Wire Type | Twin parallel and flat cable and multi core. |
| Cable size | 0.50 – 8.0 sqmm |
| Maximum cable Outer dia | 8.0 mm (round), 4.0 x 8.0 mm (flat) |
| Lead Stripping Length | 1.0 – 50.0 mm |
| Tail Stripping Length | 1.0 – 100.0 mm |
| Length Accuracy: | ±0.1mm ( L x 0.02%) Depends on the materials |
| Noise Level: | < 70 db |
| Power Supply: | 230 to 240V (50/60 Hz) |
| Program memory capacity: | Upto 99 no’s with all processing parameters |
| Motor | 900 Watts |
| Air supply | 4.0-6.0 bar Dried and filtered air |
| Dimensions (L x W x H): | 420 x 340 x 280 mm |
| Net Weight: | 31 kgs |
View Complete details
get quoterequest a call back
Cable Cutting & Stripping Machine (Mega-Strip 999)
Price on Request
| Length Measuring System | By means of encoder on transport unit |
| Operating Parameters Setting | 7inch TFT touch screen operation |
| Function Display | Alphanumerical Digital Display |
| Electrical Power Supply | 230 v single phase +/-5%,50 / 60 Hz |
| Connecting Load | 5 KW |
| Pneumatic Power Supply | Minimum 3 to 8 bar maximum ( 50 to 116 PSI) |
This is a fully automatic cable cutting and stripping machine. It handles and processes uni-core cables and multi-core cables of external diameters from 1mm to upto 15mm maximum. The insulation materials that this Megastrip-999 handles are of PVC, Extruded Teflon, Silicon and many other types of materials. This machine can be operated by means of 7" TFT touch screen. Its mechanical system consisting of 5 servo motors and 2 micro hybrid stepper motor drives and PLC based controller
Features of Megastrip-999- Quick change guide tubes and blades
- Simple operation of HMI (TFT Touch Screen)
- User-friendly operation
- Quick programming
- Mid-strip facility available (optional)
| Dimensions (L x W x H): | 550 x 800 x 1400 mm (21.6 x 31.4 x55.1 inches) |
| Machine Weight: | 330 kgs |
| Cutting Length: | 60 mm (2.36") to 100 meters (3937") (Step of 0.1 mm) |
| Tolerance: | ±0.2% |
| Strip Length Side 1 : | 75 mm (2.95 inches) Maximum |
| Strip Length Side 2 : | 250 mm (9.84 inches) Maximum (Depends on the cable) |
| Quantity Setting : | 1 no. to 9999 nos. |
| Piece Step : | 1 Cable |
| Feed Speed : | 500 mm per sec maximum |
Productivity Chart of Megastrip-999
| WIRE SIZE | DESCRIPTIONS | QTY / HOUR |
| 4.0 to 16.0 sq mm (1 wires) | Both Side Stripping | 2000 |
| 25 to 50 sq mm (1 wires) | Both Side Stripping | 1200 |
| 50 to 95 sq mm (1 wire) | Both Side Stripping | 900 |
| 2 core and 3 core cutting & stripping | Both Side Stripping | 700 (At 2 meters length) |
View Complete details
get quoterequest a call back
Cutting and Stripping Machine - Mega Strip-999 plus
Price on Request
| Frequency | +-0.1MM ( L x 0.02%) Depends on the materials |
| Voltage | 440V (50/60 Hz) 3 Phase |
| Compressed Air Connection | Not Required |
| Max Outer Diameter | 4.0 - 22.0 mm |
| Short Wire Lengths | 6.0 sqmm |
| Wire Length Range | 180.0 mm |
FEATURES:
Quick change quide tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (TFT Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).
TECHNICAL DETAILS:
| Operating interphase | PLC With HMI (Touch Screen), PC interphase compatibility |
| Wire Type | Pvc,Silicon and other plastic wires and multi core cables. |
| Minimum cable size | 6.0 sqmm |
| Maximum cable size | 180.0 mm |
| Cable Outer Dia | 4.0 – 22.0 mm |
| Lead Stripping Length | 500 mm |
| Tail Stripping Length | 100 mm |
| Length Accuracy: | ±0.1MM ( L x 0.02%) Depends on the materials |
| Noise Level: | < 70 db |
| Program memory capacity: | Upto 500 no’s with all processing parameters |
| Power Supply: | 440V (50/60 Hz) 3 Phase |
| Motor | 9.0 Kw |
| Drive | 7 Axis Servo Motor Controlled |
| Air supply | Not Required |
| Dimensions (L x W x H) | 2300 x 500 x 1280 mm |
| Net Weight: | 450 kgs |
View Complete details
get quoterequest a call back
Cutting and Stripping Machine - Mega Strip - 300
Price on Request
| Cutting Accuracy | +-0.1MM ( L x 0.02%) Depends on the materials |
| Compressed Air Supply | 4 to 6 bar. |
| End Stripping | 100 mm |
| Motor Power | 12.0 Kw |
| Power Consumption | 440V (50/60 Hz) 3 Phase |
| Weight | 450 kgs |
FEATURES:
• Quick change guide tubes and blades.
• Simple operation of HMI (Touch Screen).
• User-friendly operation.
• Quick programming.
TECHNICAL DETAILS:
| Operating interphase | PLC With HMI (Touch Screen). |
| Wire Type | Pvc,Silicon and other plastic wires and multi core cables. |
| Minimum cable size | 10.0 sqmm |
| Maximum cable size | 180.0 sqmm |
| Cable Outer Dia | 4.0 – 22.0 mm |
| Lead Stripping Length | 500 mm |
| Tail Stripping Length | 100 mm |
| Length Accuracy: | ±0.1MM ( L x 0.02%) Depends on the materials |
| Noise Level: | < 70 db |
| Program memory capacity: | Upto 500 no’s with all processing parameters |
| Scada Programable | Machine can run by connecting to PC (Computer) |
| Power Supply: | 440V (50/60 Hz) 3 Phase |
| Motor | 12.0 Kw |
| Drive | 8 Axis Servo Motor Controlled |
| Air supply | 4 to 6 bar. |
| Dimensions (L x W x H) | 2300 x 500 x 1280 mm |
| Net Weight: | 450 kgs |
View Complete details
get quoterequest a call back
EXPLORE MORE CATEGORIES