Sai Paradise Machine Tools (india) Private Limited

_Overview

The powerful Cut-Strip-999 processes round cables upto 4 mm outer dia. And it strips both sides upto 30 mm. It has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 100 wires with all the processing parameters. This Cut-Strip-999 is designed in micro-processed based with hybrid stepper motors and HMI

Features:

• Quick change guide tubes and blades
• Simple operation with keypad
• User-friendly operation
• Quick programming
• Mid-strip facility available (optional)

Advantages

• Stripping lengths – Partial strip
• Stripping lengths - Full strip
• Can strip single core as well as small multi-core cables
• Mid-strip facility for small cables (optional)
• Inch mode option to set the blades as per cables
• Step run option to trace the problem if machine malfunctions
• Less Wastage
• Low Noise
• Counter Option
• No wire signal with machine stop option
• Auto start delay facility to run in continuous production

Details:
Productivity Chart of CUT-STRIP-999

Note: Standard Length 100 mm unless specified. Quantity might differ as per wire quality.

The CutStripTwist – (Cut Strip – 999+) machines are computerized control, bottom operation, stable working performance, easy operation. It has design capabilities for maximum speed and flexibility, high precision & quick changeover and long term durability. Various applications are easily processed as per the clients requirements.

It has dynamic servo controlled motors driver & PLC based controller and is optimized with touch screen cut, strip and twist-(Cut Strip -999+) helps, save and restore the programs upto 500 types for quick product selection to avoid the delay programme.

FEATURES:

• Two wires can be processed at the same time, automatically Cutting, Stripping & Twisting.
• High productivity.
• Less changeover time.
• Short & easy setup time.
• Very less and negligible maintenance.

DETAILS:

Overview

The powerful Unistrip-999 processes round cables upto 8 mm outer dia. And processes 2 core, 3 core flat and round cables with pull-off lengths upto 100 mm on the right end (leading end) and 40 mm on the left end (trailing end). This Unistrip-999 has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 200 wires with all the processing parameters. This Unistrip-999 is designed in PLC based with servo motors and HMI

Features:

• Quick change guide tubes and blades
• Simple operation of HMI (TFT Touch Screen)
• User-friendly operation
• Quick programming
• Mid-strip facility available (optional)

Advantages

• Stripping lengths – Partial strip
• Stripping lengths - Full strip
• Can strip single core as well as multi-core cables
• Mid-strip facility for small cables
• Inch mode option to set the blades as per cables
• Step run option to trace the problem if machine malfunctions
• Less Wastage
• Low Noise
• Counter Option
• Foot Pedal operation for operator convenience
• No wire signal with machine stop option
• Auto start delay facility to run in continuous production

Details:

PRODUCTIVITY CHART OF UNISTRIP-999

This is a fully automatic cable cutting and stripping machine for 2 cores flat & round cables. It handles and processes multi-core cables of external diameter 8.0 sqmm maximum. It is designed for flat sheathed wire s by stripping the 2 layers at the same time (the sheath and core insulation).The insulation materials that this Smart strip-999 handles are of PVC, Extruded Teflon, Silicon and many other types of materials.

FEATURES:

Quick change quid tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).

DETAILS:

This is a fully automatic cable cutting and stripping machine for multi cores & round cables. It handles and processes multi-core cables of external diameter 8.0 sqmm maximum. It is designed for round sheathed wire s by stripping the outer sheath. The insulation materials that this multi strip-999 handles are of PVC, Silicon and many other types of materials.

FEATURES:

Quick change quid tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).

TECHNICAL DETAILS:

This is a fully automatic cable cutting and stripping machine. It handles and processes multi-core cables of external diameters from 6.0 sqmm to 300.0 sqmm maximum for. The insulation materials that this Megastrip-300 handles are of PVC, Extruded Teflon, Silicon and many other types of materials.

FEATURES:

• Quick change guide tubes and blades.
• Simple operation of HMI (Touch Screen).
• User-friendly operation.
• Quick programming.

TECHNICAL DETAILS:

This is a fully automatic cable cutting and stripping machine for 2 cores flat & round cables. It handles and processes multi-core cables of external diameter 8.0 sqmm maximum. It is designed for flat sheathed wire s by stripping the 2 layers at the same time (the sheath and core insulation).The insulation materials that this Multi strip-999 plus handles are of PVC, Extruded Teflon, Silicon and many other types of materials.

FEATURES:

Quick change quid tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).

The powerful Eco-Strip-999 processes round cables upto 4 mm – 50 mm outer dia. It has a powerful cutting and transport drives for higher production rates. This machine can process 4 wires at a time, hence improves productivity. This Eco strip-999 is designed in PLC based with hybrid stepper motors and HMI (Touch Screen).

FEATURES:

• Quick change guide tubes and blades.
• Simple operation of HMI (Touch Screen).
• User-friendly operation.
• Quick programming.

TECHNICAL DETAILS:

Overview

This is a fully automatic cable cutting and stripping machine. It handles and processes uni-core cables and multi-core cables of external diameters from 1mm to upto 15mm maximum. The insulation materials that this Megastrip-999 handles are of PVC, Extruded Teflon, Silicon and many other types of materials. This machine can be operated by means of 7" TFT touch screen. Its mechanical system consisting of 5 servo motors and 2 micro hybrid stepper motor drives and PLC based controller

Features of Megastrip-999

• Quick change guide tubes and blades
• Simple operation of HMI (TFT Touch Screen)
• User-friendly operation
• Quick programming
• Mid-strip facility available (optional)

Details:
Productivity Chart of Megastrip-999

The powerful Cut-Strip-999 (4 wires) processes round cables upto 4 mm outer dia. It has a powerful cutting and transport drives for higher production rates. This machine can process 4 wires at a time, hence improves productivity. This Cut-Strip-999 (4 wires) is designed in PLC based with hybrid stepper motors and HMI (Touch Screen).

FEATURES:

• Quick change guide tubes and blades.
• Simple operation of HMI (Touch Screen).
• User-friendly operation.
• Quick programming.

DETAILS:

Overview

The powerful Unistrip-999+ processes round cables upto 8 mm outer dia. And processes 2 core flat cables with pull-off lengths upto 100 mm on the right end (leading end) and 40 mm on the left end (trailing end). This Unistrip-999+ has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 200 wires with all the processing parameters. This Unistrip-999+ is designed in PLC based with servo motors and HMI

Features:

• Quick change guide tubes and blades
• Simple operation of HMI (TFT Touch Screen)
• User-friendly operation
• Quick programming
• Mid-strip facility available (optional)

Advantages

• Stripping lengths – Partial strip
• Stripping lengths - Full strip
• Can strip single core as well as multi-core cables
• Mid-strip facility for small cables
• Inch mode option to set the blades as per cables
• Step run option to trace the problem if machine malfunctions
• Less Wastage
• Low Noise
• Counter Option
• Foot Pedal operation for operator convenience
• No wire signal with machine stop option
• Auto start delay facility to run in continuous production

PRODUCTIVITY CHART OF UNISTRIP-999+

Note: Standard Length 100 mm unless specified. Quantity might differ as per wire quality.

This is a fully automatic cable cutting and stripping machine. It handles and processes multi-core cables of external diameters from 6.0 sqmm to 180.0 sqmm maximum for. The insulation materials that this Megastrip-999 plus handles are of PVC, Extruded Teflon, Silicon and many other types of materials.

FEATURES:

Quick change quide tubes and blades.
• User – friendly operation.
• Mid-strip facility available (optional).
• Simple operation of HMI (TFT Touch Screen).
• Quick programming.
• Inline slitting attachment (optional).

TECHNICAL DETAILS: