Sai Paradise Machine Tools (India) Private Limited

Common Applications

• Wire terminal pull-out testing

• Button press force

• Switch actuation force

• Crimp strength

• Adhesive/bond testing

• Spring testing

• Packaging seal strength

• Spring testing

• Connector insertion/extraction

• Seal integrity testing

• Button or keypad force testing

• Wire harness retention

• Packaging strength tests

• Required force capacity (based on your materials/components)

• Whether you need peak force capture

• Need for data logging or PC connectivity

• Compatibility with fixtures or grips

• Calibration certification (ISO/NIST traceable)

This instrument is designed for measuring tensile strength of soldered or solder-free cable joints with end sleeves, pins, solder pins or similar wire terminal components in accordance with all the standards.

Test samples are inserted into the receptacle Standard adaptor which has
8 different slot widths (from 1.5 mm to 5.0 mm) covering all the prevalent wire strengths and terminal types. The traction force is applied by an easy gliding lever system which simultaneously clamps the wire and creates a consistent pull with minimal effort.

The traction force is collected at an accuracy of ±0.5 % and is shown on the display at a resolution of 10 grams. The peak value at which the cable is torn will be automatically shown in the display.

• Wire crimp pull-out force

• Adhesive bond strength

• Button/switch press force

• Packaging seal strength

• Spring compression testing

• Connector insertion/removal force

• Tensile testing of plastic, rubber, metals (in light-duty cases)

• Wire harness pull testing

• Packaging compression or seal strength testing

• Spring or component fatigue testing

• Button press/release force measurement

• Adhesive or weld strength testing

• Medical device testing (e.g., syringes, connectors)

Test samples are inserted into the receptacle Standard adaptor which has 12 different slot widths (from 0.5 mm to 6.0 mm) covering all the prevalent wire strengths and terminal types. The traction force is applied by an easy gliding lever system which simultaneously clamps the wire and creates a consistent pull with minimal effort.

The traction force is collected at an accuracy of ±0.5 % and is shown on the display at a resolution of 10 grams. The peak value at which the cable is torn will be automatically shown in the display

• High accuracy and reproducibility
• Solid construction for high durability
• Less Weight
• Simple operation with automatic peak value recording.

A Crimp Load Tester is a specialized type of force testing machine used to measure the pull-out force (tensile force) required to separate a crimped terminal from a wire. It’s essential in quality control for verifying the mechanical strength of wire crimp connections — commonly found in the automotive, aerospace, electrical, and electronics industries.