View Mobile No.

our range

Winding And Tying Series

Pioneers in the industry, we offer cable tying machine - (cnt-777) and winding and tying machine - wt-999 from India.
Cable Tying Machine - (CNT-777)

Cable Tying Machine - (CNT-777)

Price on Request
Classification2.5 x 80 mm
Size1040 x 640 x 750
Weight120 Kgs (with 4 wheels, move easily)
The Cable Tying Machine – (CNT – 777) is used by pedal. Automatically move the cable ties to the position of the jaws. Automatically collects the waste material into waste tank. The binding force would be more accurate and stable than the electronic measure and converting system. The tightening force and residual tail are set by adjusting screws.

FEATURES:

• Use bulk cable ties, vibration feeding, automatically move the cable ties to the position of the jaws.
• Pedal the pedal, automatically wrapping, perforating, pulling and tightening, cut off, collecting the waste material into waste tank.
• The whole operation takes only 0.8 sec, (not including auxiliary time), one machine can save 3-4 operations.
• Binding force is adjustable by turning the knob, the residual tail length is adjustable.
• The binding force is controlled by mechanical device, the binding force would be more accurate and stable than the electronic measure and converting system.
• The tightening force and residual tail are set by adjusting screw, after setting, the force and residual tail length would keep stable.
• Could tighten harness with PVC sleeve, no need to pre – heating in advance.

View Complete details

get quoterequest a call back
  • Winding and Tying Machine - WT-999
  • Winding and Tying Machine - WT-999
  • Winding and Tying Machine - WT-999
  • Winding and Tying Machine - WT-999
  • Winding and Tying Machine - WT-999
Winding and Tying Machine - WT-999

Winding and Tying Machine - WT-999

Price on Request
Maximum Coil Dia50-200mm
FrequencyNIL
VoltageAC 220V 60HZ
The winding and tying machine – (WT – 999) has simple operation and adjustment, stable running and low failure rate. This machine is equipped with winding motor and controlled by PLC touching screen.

FEATURES:

  • This machine is equipped with winding motor, and controlled by PLC touching screen.
  • Automatically set the tying belt length, cutting and tying.
  • The winding laps and speed can be adjusted and set.

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES